Home Products Distributors CatalogueSupport Search

EUI Poptest HH705

The HH705 EUI Poptest provides a means for service workshops and garages to carry out functionality testing of new, repaired and remanufactured EUI's, checking for leaks, spray pattern, spring rate, solenoid operation and nozzle opening pressure (NOP) in addition to all testing offered by the Testmaster 3. The HH701 testmaster 3 can be upgraded to HH705 by returning the testmaster to the point of origin to have an HK862 fitted. For more information contact your distributor.

To see a video of the EUI Poptest in action, click here

 

Main Features

  • Operates in conjunction with the HH701
  • Software driven by the HH701
  • Powered operation of injector plunger
  • Mechanical fixturing
  • Quick release type fueling connectors
  • EUI controller
  • Allows assessment of spray pattern, spring rate, solenoid operation and NOP
  • Includes replacement pneumatics panel and new software for the HH701
 HK862

Benefits

Product Matrix

The chart below defines the application kits required to test the various designs of EUI/EUP Test Systems.

Vehicle
Manufacturer		 Detroit
Diesel
(Series 60)		 Volvo Audi/VW
Seat
Skoda		 Caterpillar
C10		 Iveco
Cursor
10/13		 John
Deere		 Caterpillar
3406
C15		 Iveco
Cursor
8		 Scania Cummins
Celect		 Land
Rover		 Caterpillar
3176
C12

HH705 or HH701 +HK862
HS254 CAT flow valve               *  
HK831                      
HK832                      
HK833                      
HK834                      
HK835                      
HK832                      
HK836                      
HK837                      
HK838                      
HK839                      
HK840                      
HK840                      

* refer to technical bulletin

TECHNICAL SPECIFICATION
User interface Testmaster 3 HH701 Control Keypad & Display*
Pressure Reading 0 to 500 bar
Resolution 1 bar
Accuracy 'Typically' +/- 1% of fsd unless stated differently in teh specific injector
application sheet
HH705 repeatability 'Typically' +/- 1% of fsd unless stated differently in teh specific injector
application sheet
HH701 (normal operation) Accuracy of +/- 1% of fsd*
High Pressure Pipe Connector m14 x 1.5 (as supplied with the Testmaster 3 HH701)
Electrical Supply 110/220-240 VAC/3A 50/60Hz (in addition to the Testmaster 3 HH701 electrical supply)
Air Supply 5 to 6 bar, recommended air supply pipe diameter 10mm
Footprint 58cm x 70cm x 56cm
PC/Printer RS232 connection

* Refer to Testmaster 3 HH701 brochure for full details on operation of the HH701 for single stage and CR injectors.

Complementary Products

HH701 HH720 CR Signal Units
Figure 3 Testmaster 3 HH701 Figure 4 2 Stagemaster Figure 5 IFT-c Control Box

Additional Accessories

Ordering

Shipping

 
Gross Weight
Net Weight
Case Size
HH701 56kg 38kg 75 x 66 x 63cms
HK862 6kg 5kg 30 x 23 x 15cms
HK862W 64kg 43kg 75 x 66 x 63cms

Downloads

 

Language
English
French
German
Italian
Russian
Spanish
EUI Poptest HK705
N/A
N/A
N/A

Video

Watch the EUI Poptest in action below:

Last updated: 23.10.09